frederik@frederik-laptop:~$ sudo eciadsl-config-text [sudo] password for frederik: ===== Welcome to the EciAdsl Linux driver configuration ===== At any time, press Ctrl+C to quit this script without saving modifications. Tip: you can run eciadsl-config-text with a .bin file as parameter to change your .bin quickly. Your choice: 1) Configure all settings 2) Remove dabusb module 3) Change synch .bin file Enter your choice (1-3, default is 1): ===> EciAdsl driver setup <=== Current user name is: fb222759@SKYNET Type in your user name (given by your provider, press ENTER to keep the previous one): * user name unchanged Type in your password (given by your provider): Type in your password again (for verification): Select your provider: 1) Previous setting (BE..Belgacom Skynet) 2) AR..Telviso 3) AU..Arachnet 4) AU..iiNet 5) AU..Pacific Internet 6) AU..TPG 7) BE..Belgacom Skynet 59) UK..Pipex UK 60) Other Enter your choice (1-60, default is 1): If your provider was not listed (or if you want to overwrite defaults), you can type in your own DNS servers: DNS1 currently set to 195.238.2.21 Type in an IP for DNS1 (press ENTER to keep current value): * DNS1 unchanged DNS2 currently set to 195.238.2.22 Type in an IP for DNS2 (press ENTER to keep current value): * DNS2 unchanged Enter now your VPI/VCI (depending on your provider/country) Example for France: 8 35 (VPI=8, VCI=35) These values correspond to the number dialed under Windows. VPI currently set to 8 Type in your VPI (given by your provider, press ENTER to keep the previous one): * VPI unchanged VCI currently set to 35 Type in your VCI (given by your provider, press ENTER to keep the previous one): * VCI unchanged Select your modem: 1) Previous setting (Other) 2) Aethra Starmodem 3) Allnet ALL768UB 4) Archtek UGW-8000 5) Askey ALE070 6) Askey ALE130 7) Askey ALE150 8) Asus AAM6000UG 67) Zyxel Prestige 630-41 68) Other Enter your choice (1-68, default is 1): If your modem was not listed (or if you want to overwrite defaults), you can enter your own VID1/PID1/VID2/PID2 (use eciadsl-probe-device to get them), Globespan chipset and USB alt interface values: VID1 currently set to 0b05 Type in a VID1 (4-digit hexadecimal, press ENTER to keep current value): * VID1 unchanged PID1 currently set to 6206 Type in a PID1 (4-digit hexadecimal, press ENTER to keep current value): * PID1 unchanged VID2 currently set to 0b05 Type in a VID2 (4-digit hexadecimal, press ENTER to keep current value): * VID2 unchanged PID2 currently set to 6206 Type in a PID2 (4-digit hexadecimal, press ENTER to keep current value): * PID2 unchanged Select your modem chipset: 1) Previous setting (GS7070) 2) GS7070 3) GS7470 Enter your choice (1-3, default is 1): USB ALT INTERFACE for SYNCH process currently set to 4 Type in the USB ALT INTERFACE for SYNCH (1-digit decimal (0-5) , press ENTER to keep current value): * USB ALT INTERFACE for SYNCH unchanged USB ALT INTERFACE for PPPOECI process currently set to 4 Type in the USB ALT INTERFACE for PPPOECI (1-digit decimal (0-5) , press ENTER to keep current value): * USB ALT INTERFACE for PPPOECI unchanged Select your .bin file for synch: 1) Previous setting (/etc/eciadsl/synch01.bin) 2) /etc/eciadsl/synch01.bin Enter your choice (1-2, default is 1): Select your PPP mode (use the DEFAULT one if you don't know what this means): 1) Previous setting (LLC_RFC2364) 2) VCM_RFC2364 3) LLC_RFC2364 4) LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS 5) VCM_RFC_1483_BRIDGED_ETH 6) LLC_RFC1483_ROUTED_IP 7) VCM_RFC1483_ROUTED_IP Enter your choice (1-7, default is 1): 5 In current config, DHCP is enabled Is DHCP used by your provider (MOST users should say NO)? (y/n or press ENTER to keep current value) * DHCP usage unchanged ==== Configuration will be created with these values : + User : fb222759@SKYNET + Password : (hidden) + Provider : BE..Belgacom Skynet DNS 1 : 195.238.2.21 DNS 2 : 195.238.2.22 + VPI/VCI : 8/35 + Modem : Other GS chipset : GS7070 VID1/PID1 : 0b05/6206 VID2/PID2 : 0b05/6206 ALT SYNCH : 4 ALT PPPOECI : 4 + .bin file : /etc/eciadsl/synch01.bin + PPP mode : VCM_RFC_1483_BRIDGED_ETH + use DHCP : yes + use static IP : yes Press ENTER to create config files or Ctrl+C to exit now without saving. backing up /etc/resolv.conf to /etc/resolv.conf.bak12.. OK creating /etc/resolv.conf..OK backing up /etc/ppp/chap-secrets to /etc/ppp/chap-secrets.bak13.. OK modifying /etc/ppp/chap-secrets.. OK backing up /etc/ppp/pap-secrets to /etc/ppp/pap-secrets.bak13.. OK modifying /etc/ppp/pap-secrets.. OK backing up /etc/ppp/peers/adsl to /etc/ppp/peers/adsl.bak12.. OK modifying /etc/ppp/peers/adsl.. OK backing up /etc/eciadsl/eciadsl.conf to /etc/eciadsl/eciadsl.conf.bak12.. OK updating /etc/eciadsl/eciadsl.conf..OK ==== eciadsl-config-text: Configuration updated with success ! You can now run eciadsl-start (as root) to connect to the internet. frederik@frederik-laptop:~$ sudo eciadsl-start [EciAdsl 1/5] Setting up USB support... Preliminary USB device filesystem is OK [EciAdsl 2/5] Uploading firmware... can't set interface 0 to use alt setting 1 : Invalid argument ERROR eciadsl-firmware: failed eciadsl-firmware: success firmware loaded successfully [EciAdsl 3/5] Synchronization... ERROR can't set interface 0 to use alt setting 4 ERROR eciadsl-synch: failed ERROR: failed to get synchronization frederik@frederik-laptop:~$ sudo eciadsl-start [EciAdsl 1/5] Setting up USB support... Preliminary USB device filesystem is OK [EciAdsl 2/5] Uploading firmware... can't set interface 0 to use alt setting 1 : Invalid argument ERROR eciadsl-firmware: failed eciadsl-firmware: success firmware loaded successfully [EciAdsl 3/5] Synchronization... ERROR can't set interface 0 to use alt setting 4 ERROR eciadsl-synch: failed ERROR: failed to get synchronization frederik@frederik-laptop:~$ exit exit Script done on Wed 21 Jan 2009 08:03:06 PM CET